Importance of Septic Tank Inspection and Replacement.
It is a fact of life that after flushing the toilet, we don’t care what happens to the waste next. You don’t have to think about it if you are living in a home on urban water systems. But for people living in homes hooked to septic systems then they cannot ignore this maintenance issue. Your septic tank need to be inspected regularly whether you home is new or old because if not you will not be able to spot problems and if you need to replace the tank it will cost you much, what you could have avoided if issues were spotted before they became emergencies.
A septic tank system consists of a large holding tank made of plastic, steel, or concrete. These tanks hold all of the household waste, especially the water and waste released when you flush the toiler. Sometimes septic tank content reach to its maximum level and when this happens the contents need to be disposed in some ways. There are three ways in disposing the waste – by pumping it out, by having bacteria or chemical added that will break down and destroy the waste, or by allowing it to be drained into the soil through a leech field.
Eventually in time our septic tank systems will need maintenance just like any other hard working systems. Septic tank systems are usually buried underground so it will be hard to tell when it is time for regular maintenance and this is the reason why it is important to schedule septic tank inspection and replacement assessments. There are a lot of things involved in septic tank maintenance to be able to avoid major problems or potential problems so that you don’t have to unnecessarily spend for this.
Pumping your septic tank should be done regularly because this gives service technicians a chance to inspect the tank for any issues, and this should be done even if you have a leech field for your waste or even if you are adding bacteria to break down the waste. Pumping the tank is required more for smaller tanks than for larger ones. Despite having water conservation measures in place, you still need the tank to be pumped out and inspected at least once in three to five years.
If you want a good and thorough inspection of your tank, it involves a visual check of the tank, connectors, and drainage points, and the leech field and the tank should be opened and the inside inspected. Tests are performed by field service agents where they test the function of the tank itself like adding dye to the water to test for leaks. Signs of wear and tear will also be seen in baffles, lids, connections and connecting pipes that can easily be reached.
Researched here: check my source