How To Repair Broken Ford Door Latch And Cables On Ford F

Door LatchesI’ve been a mechanic for several years and I’ve had hundreds of consumers come into my shop complaining about broken Ford door cables and latches. What happens is the door cables in Ford Trucks (F-150, F-250, F-350, Ranger) and Ford Vans (F-150, F-250, F-350) have plastic ends that preserve the cables fastened in the door cable latches, and these ends corrode and break more than time. When a individual goes to open the door, they will lift up on the door handle and the door won’t open simply because the plastic cable finish is broken. If you take this problem to a Ford Dealership they will inform you that you need to have to spend $400 on replacement door cable latches and cables which is ridiculous!

I had the portion number ahead of and following searching and looking I nonetheless can’t locate it. If you call the dealership with the rod number listed above they can pull up a diagram in etka that will have that part number. Sorry I could not be a lot more support. After I get my pc with etka operating again I will post it here for future inquiries.

All of the how to’s and mods that I present on this web page have worked for us and our Roadtrek but they could not work on yours. If you pick out to use these you do so at your own danger. We take nor assume no duty. Some models will have unique locations for elements and appliances and diverse tends to make and models of components all collectively. Also be conscious that this is not an authorized Roadtrek web page and is in no way affiliated with Roadtrek Motorhomes, Inc.

The Adams Rite 4900 deadlatch is created to be installed in the exact same prep as the MS1850S. The Adams Rite 4591 paddle will interface perfectly with the inner cylinder hole that was reduce for the MS1850S (supplied you selected the right backset latch). If you like, you can reuse the cylinder that came with the MS1850S and hold the exact same crucial. All in all, the lock side of converting the MS deadbolt to a latch is no problem.

The initial thing you want to verify is that the screws that attach the hinges to the door and door jamb are tight. Open the door to expose the screws. Turn all the screws clock-smart until they quit moving. Use a common screwdriver to make sure you do not strip the wood. If the screws were a small loose recheck the door to see if it latches now. If it does, congratulations, you are performed and can now go onto the rest of the chores you have to do these days.